| Wizzup | sicelo: ok, I think I can also reproduce the audio issue you mentioned where if you get called there other party can't hear you | 00:01 |
|---|---|---|
| Wizzup | but you can hear them fine | 00:01 |
| Wizzup | pa seems to be in a fine state | 00:03 |
| Wizzup | time to dump log sI guess | 00:03 |
| Wizzup | sicelo: I don't know, maybe busctl just messes with me, I can't even just ste RoamingAllowed to true :D | 00:08 |
| Wizzup | introspect doesn't seem to work on /motmdm_0/context_1 either, just on /motmdm_0 | 00:11 |
| Wizzup | sicelo: I will try to debug this problem tomorrow (I just put my main sim in another droid 4, so have a proper incentive) | 00:14 |
| Wizzup | ftr this worked immediately mdbus2 -s org.ofono /motmdm_0 org.ofono.ConnectionManager.SetProperty 'RoamingAllowed' true | 00:17 |
| Wizzup | freemangordon: hm, I'm getting repeated smses on this droid4 too | 00:25 |
| Wizzup | any logs I can provide? | 00:25 |
| Wizzup | stopped after a reboot | 00:37 |
| Wizzup | I also noticed that I think the vibration pattern makes more sense on a Hw rev A than it does on Hw rev B | 00:38 |
| Wizzup | I wonder if those are different somehow | 00:38 |
| Wizzup | tmlind: I remember that hw A had this missed keys issue, I think this is still present, do you remember if this was indeed some hw bug? | 00:42 |
| Wizzup | I guess I should test on android and compare | 00:42 |
| Wizzup | hm, just started to wonder if I need to net unlock the razr for it to work, but IIRC I don't think that's the case for outside the US | 00:48 |
| Wizzup | just did net unlock, let's see | 01:04 |
| Wizzup | no dice, maybe some fw settings | 01:15 |
| Wizzup | hm, somehow it just connected | 01:15 |
| Wizzup | strange | 01:15 |
| Wizzup | cool | 01:15 |
| sicelo | Wizzup: busctl is a bit annoying in that it needs you to provide the appropriate signature as well when making method calls. so that's why you probably had issues with SetRoaming. gdbus doesn't have that 'limitation' | 01:24 |
| Wizzup | ok | 01:25 |
| Wizzup | for now I just installed libreadline7 and got my trusty mdbus2 back | 01:25 |
| Wizzup | but I will take a look at gdbus as well | 01:25 |
| sicelo | :-P | 01:25 |
| Wizzup | bedtime first though | 01:25 |
| Wizzup | now that I got the razr to connect I can put my main sim in my good droid4 tomorrow | 01:26 |
| Wizzup | in any case I hope to try to make some progress on the audio issues in calls tomorrow | 01:26 |
| Wizzup | since I can reproduce it | 01:26 |
| sicelo | great | 01:27 |
| * sicelo will only be back to Leste stuff hopefully by end of the week | 01:27 | |
| Wizzup | no worries, we all have those times :D | 01:36 |
| freemangordon | Wizzup: I guess those repeated SMSes are related to ofono | 06:58 |
| freemangordon | BTW, yesterday I hit the "other party do not hear me" bug | 06:59 |
| Wizzup | freemangordon: yeah that other side bug I hope to figure out today, at least a workaround for it | 10:48 |
| arno11 | Wizzup: i'm currently looking @pcsx and just noticed we have an issue with PA in build-linux: 'fatal error: pulse/pulseaudio.h: No such file or directory' | 11:36 |
| arno11 | #include <pulse/pulseaudio.h> | 11:36 |
| arno11 | it doesn't happen with local build | 11:37 |
| Wizzup | you need to depend on sone -dev pkg | 11:38 |
| Wizzup | let me see if I can find the name for you | 11:38 |
| arno11 | ok thx | 11:38 |
| Wizzup | lubpulse-dev ? | 11:39 |
| Wizzup | libpulse-dev ? | 11:39 |
| arno11 | let me check, ty | 11:40 |
| arno11 | libpulse-dev is already in control | 11:41 |
| Wizzup | is it in build-depends | 11:43 |
| arno11 | yep | 11:44 |
| Wizzup | in that case maybe pkg-config is not called or something | 11:44 |
| Wizzup | can't be anything else | 11:44 |
| arno11 | ok i'll have a look | 11:45 |
| Wizzup | so where do you see this problem specifically | 11:45 |
| Wizzup | what is build-linux ? | 11:45 |
| arno11 | on the CI | 11:47 |
| arno11 | (linux armhf) | 11:48 |
| freemangordon | what build system? automake? | 12:03 |
| freemangordon | where is the code? | 12:03 |
| arno11 | maemo-leste-extra/pcsx_rearmed | 12:04 |
| freemangordon | what the? | 12:04 |
| freemangordon | how was the configure script created? | 12:04 |
| arno11 | that's the original one from notaz | 12:05 |
| arno11 | iirc | 12:05 |
| freemangordon | I understand that, but man, what a mess | 12:05 |
| arno11 | yes indeed !!! | 12:05 |
| arno11 | it builds well locally btw | 12:07 |
| arno11 | with no pulseaudio troubles | 12:07 |
| freemangordon | here https://github.com/maemo-leste-extras/pcsx_rearmed/blob/Extras/Makefile | 12:08 |
| freemangordon | sorry, I menat https://github.com/maemo-leste-extras/pcsx_rearmed/blob/Extras/Makefile#L233 | 12:09 |
| freemangordon | this shall be CFLAGS += $(shell pkg-config --cflags hildon-1 libpulse) -DHAVE_TSLIB | 12:09 |
| freemangordon | similar to line 232 | 12:10 |
| arno11 | :D you're the best man | 12:10 |
| freemangordon | arno11: please, do not install in /usr/games | 12:11 |
| arno11 | libpulse or libpulse-dev btw ? | 12:11 |
| freemangordon | there is /opt for that | 12:11 |
| freemangordon | libpulse | 12:11 |
| arno11 | ok | 12:11 |
| arno11 | and ok | 12:11 |
| freemangordon | so, I think the proper place to install is /opt/pcsx_rearmed or somesuch | 12:12 |
| Wizzup | sorry | 12:12 |
| Wizzup | I don't think we should use /opt for this | 12:12 |
| Wizzup | I think /usr/games is fine | 12:12 |
| Wizzup | but maybe fmg and I should figure this out amongst ourselves | 12:13 |
| freemangordon | Wizzup: what is /usr/games ?!? | 12:13 |
| Wizzup | https://unix.stackexchange.com/questions/1687/games-directory | 12:13 |
| arno11 | i think it is better to keep /usr/games atm | 12:14 |
| arno11 | because of all tricky directories with memcards and bios | 12:14 |
| arno11 | and user config file | 12:14 |
| freemangordon | Wizzup: see the answer | 12:14 |
| freemangordon | there is no standard for /usr/games | 12:15 |
| Wizzup | https://askubuntu.com/questions/1363348/dpkg-buildpackage-install-to-usr-games-instead-of-usr-bin | 12:15 |
| freemangordon | it shall be in either /usr/share/ or even better in /opt | 12:15 |
| Wizzup | I think opt is normally when you go around the package manager no :) | 12:16 |
| freemangordon | no\ | 12:16 |
| freemangordon | hmm, what the?!? I have /usr/games on my ubuntu :D | 12:16 |
| freemangordon | oh, ok | 12:16 |
| Wizzup | maybe dpkg -S it | 12:17 |
| freemangordon | well, there are games in it, no need to verisy | 12:17 |
| Wizzup | ok | 12:18 |
| freemangordon | my understanding is that /usr and /opt might not be on the same filesystems, lets see what specs say about it | 12:18 |
| Wizzup | the specs are rather comvoluted on this exactly | 12:18 |
| Wizzup | the really prehistoric idea was that /usr was a separate partition from /bin/ and /lib | 12:18 |
| Wizzup | systemd folks have been trying to 'fix' this by unifying it all | 12:18 |
| freemangordon | but that's still valid | 12:18 |
| Wizzup | yeah I didn't say it was valid or not | 12:19 |
| freemangordon | as you may have /usr/bin on a RO partition | 12:19 |
| freemangordon | the same for /usr/lib | 12:19 |
| Wizzup | I see /opt mostly for going outside of package manager and/or crappy binary only sw | 12:19 |
| Wizzup | maemo used it as a convenient way to store on larger storage partition | 12:19 |
| Wizzup | maemo was in fremantle | 12:19 |
| Wizzup | as in* | 12:19 |
| freemangordon | I see it differently | 12:19 |
| Wizzup | the whole optify concept was nice then, but it's pretty bad now IMO | 12:19 |
| Wizzup | we already really don't need it | 12:20 |
| Wizzup | s/already/also/ | 12:20 |
| freemangordon | see, the fact that nokia made a hack out of it does not invalidate the concept as such :) | 12:20 |
| Wizzup | btw, i'm a little baffled as my razr doesn't want to connect to a hrvatska a1 network using a hrvatska sim, but it is happy with my fallback dutch sim | 12:20 |
| Wizzup | but in android both work | 12:21 |
| Wizzup | but in leste the hrvatska sim just gets status:denued according to ofono | 12:21 |
| Wizzup | denied | 12:21 |
| Wizzup | and NetworkRegistration.Scan doesn't seem to trigger a lot of modem chatter at all, using n_gsm.debug=0xff | 12:21 |
| freemangordon | "Traditionally, the /opt directory is used for installing/storing the files of third-party applications that are not available from the distribution’s repository." | 12:21 |
| Wizzup | yes | 12:21 |
| freemangordon | no, we can argue if extras is distribution repo | 12:22 |
| freemangordon | *now | 12:22 |
| Wizzup | it is | 12:22 |
| freemangordon | how's that? | 12:22 |
| arno11 | (it fails again with same PA error) | 12:22 |
| freemangordon | arno11: check in the logs if that configure file is executed at all and if platform is recognized as maemo | 12:23 |
| Wizzup | freemangordon: it's literally the same host, same ci, same orga that runs it | 12:23 |
| freemangordon | where are the logs BTW | 12:23 |
| Wizzup | (us)\ | 12:23 |
| Wizzup | freemangordon: I'm more interesting in knowing exactly how arno11 is trying this since I don't see any jenkins activity | 12:23 |
| freemangordon | heh :) | 12:23 |
| Wizzup | in any case I don't care if things install in /opt because they used to do it on maemo and we're lazy to fix it (or lack time), but let's not go out of our way and put more foss things that we build from source in /opt | 12:24 |
| freemangordon | ok, ok | 12:24 |
| freemangordon | but /usr/games | 12:25 |
| freemangordon | meh :) | 12:25 |
| freemangordon | my eyes bleed | 12:25 |
| Wizzup | haha :D | 12:25 |
| freemangordon | ok, it seems neverball also installs there | 12:25 |
| Wizzup | btw, I switched my main sim to leste :) | 12:27 |
| Wizzup | exciting times | 12:27 |
| arno11 | :) | 12:27 |
| freemangordon | hehe | 12:27 |
| freemangordon | I will do after I finish connui-cell | 12:28 |
| freemangordon | maybe ;) | 12:28 |
| freemangordon | and after call audio issues are fixed | 12:28 |
| Wizzup | well there will be many more call audio issues I am sure (like on 6.9), but yes | 12:29 |
| Wizzup | it would be nice to also have the ofono 2.x some time so we can try dtmf | 12:29 |
| Wizzup | this will probably be my biggest problem for the time to come | 12:29 |
| Wizzup | brb | 12:29 |
| freemangordon | arno11: https://github.com/maemo-leste-extras/pcsx_rearmed/blob/Extras/debian/rules#L23 | 12:31 |
| freemangordon | why platform is generic? | 12:31 |
| arno11 | ah that's a 'hack' to force use gtk generic UI | 12:32 |
| freemangordon | why? | 12:32 |
| Wizzup | uvos: hm, how do I get into headset from sphone? | 12:32 |
| Wizzup | uvos: I plugged a headset in but I don't see it in the UI | 12:32 |
| freemangordon | arno11: what's wrong with hildon ui? | 12:32 |
| arno11 | otherwise we need old osso deps | 12:32 |
| freemangordon | like what? | 12:32 |
| freemangordon | we should have everything | 12:33 |
| Wizzup | btw, having connui-cellular done would be nice since there are still 75% change for internet connections settings applet to crash when it is loaded | 12:34 |
| arno11 | fmg: sorry can't answer for now | 12:34 |
| arno11 | bbl | 12:35 |
| freemangordon | arno11: just change the platform locally and try to build | 12:35 |
| arno11 | (have to go, sorry) | 12:36 |
| arno11 | it didn't work with maemo platform btw | 12:37 |
| arno11 | bbl | 12:37 |
| mdz | hello | 12:41 |
| mdz | how's the development going? | 12:41 |
| mdz | haven't checked in in some time now | 12:41 |
| Wizzup | (can answer in 10-15 mins or so) | 12:42 |
| Wizzup | but specific questions help too :P | 12:42 |
| mdz | just in general | 12:46 |
| mdz | been playing with the N900 again | 12:46 |
| mdz | but im interested specially in the possibility of bringing modern HTML/SSL standards to the N900 | 12:48 |
| mdz | so that it would be able to browse WWW normally | 12:48 |
| Wizzup | mdz: well I'd say leste on the n900 is better than fremantle already, but modern html/css/js on n900 will be a hard sell because of the old hw | 12:54 |
| mdz | also are there any 3D models of the N900 PCB? | 12:58 |
| mdz | I've found the Neo900 project but nothing there regarding that, only found the RX-51 schematics | 12:58 |
| Wizzup | I don't think the neo900 project is active or will ever be finished | 13:00 |
| Wizzup | if you want something like the n900, but a droid 4 | 13:00 |
| Wizzup | s/but a/get a/ | 13:00 |
| Wizzup | or droid3 once we support it properly | 13:00 |
| unic0rn | I'm trying to run maserati-calibrate, but it throws an error due to missing nvs_map.bin in /tmp/pds/wifi | 13:08 |
| unic0rn | when mounting pds manually, there's nothing there, only folders, no files at all | 13:08 |
| sicelo | Neo was officially scrapped. Closed. | 13:10 |
| mdz | Wizzup: the Neo is closed sadly | 13:10 |
| mdz | Wizzup: I'm just interested if the Leste could be brought to modern HW, given that someone would create such a HW | 13:12 |
| Wizzup | unic0rn: you don't need to run it manually, it's done automatically | 13:16 |
| Wizzup | mdz: we are working under the assumption that leste will run on more devices, but we limit ourselves to a handful of devices now due to lack of time and needing to focus on other parts of leste | 13:16 |
| sicelo | mdz: it's running on pinephone. | 13:17 |
| Wizzup | so we support various mapphone phones, the n900, the pinephone, the pinephone pro to a degree, some mapphone tablets | 13:17 |
| sicelo | and hopefully very soon will support librem5 too | 13:17 |
| Wizzup | we're not in the position to even dream of making hw ourselves of course | 13:17 |
| mdz | allright | 13:22 |
| mdz | i understand, but just for the sake of this conversation, what SOC would you choose, given the modern needs | 13:22 |
| Wizzup | I don't have the answer honestly | 13:23 |
| Wizzup | probably one that is decent at power management and has open drivers for the gpu | 13:23 |
| Wizzup | (maybe others have a better answer) | 13:23 |
| unic0rn | Wizzup: then why am I getting this: https://pastebin.com/raw/caxhtM7S ? | 13:26 |
| Wizzup | is this the first boot since you dd'd a new sd card? | 13:27 |
| unic0rn | no. | 13:27 |
| Wizzup | there is something on the wiki about re-doing this | 13:27 |
| unic0rn | there is indeed. | 13:27 |
| Wizzup | https://leste.maemo.org/Motorola_Droid_4#Using_a_configured_Leste_sdcard_in_a_different_Droid4 | 13:27 |
| unic0rn | boils down to reinstalling the module | 13:28 |
| unic0rn | you think reinstalling will repopulate pds? | 13:28 |
| unic0rn | from what I gathered, it's some mmc1 partition | 13:28 |
| unic0rn | I'll try | 13:28 |
| unic0rn | nope. | 13:30 |
| unic0rn | https://pastebin.com/raw/AEFxbdAp | 13:30 |
| Wizzup | is your wifi currently in use / enabled? | 13:30 |
| unic0rn | yes | 13:30 |
| Wizzup | try ifconfig wlan0 down and try again | 13:30 |
| Wizzup | I don't recall if you will get an interface named wlan1 or not, but our scripts should have abstracted all of this away | 13:31 |
| Wizzup | uvos probably rembmers better than I do on this | 13:31 |
| arno11 | freemangordon: ok i got it, i know what is wrong in makefile now, i'll try to fix it later | 13:32 |
| arno11 | but i'll keep the generic stuff atm | 13:32 |
| arno11 | bbl | 13:33 |
| unic0rn | Wizzup: https://i.imgur.com/KY5FQx0.png | 13:35 |
| Wizzup | not sure what's up then | 13:35 |
| Wizzup | uvos might be able to help | 13:35 |
| Wizzup | I haven't seen this issue in years, so I don't remember | 13:35 |
| Wizzup | anything unusual about your setup, or? | 13:35 |
| unic0rn | I don't think so. I did dist-upgrade earlier but that shouldn't matter. | 13:36 |
| unic0rn | I think it's a matter of pds partition, I have no idea what it is exactly | 13:37 |
| unic0rn | I got this phone years ago and haven't really used it earlier, it came rooted with cyanogen installed, so someone was messing with it already | 13:37 |
| Wizzup | that should not matter | 13:38 |
| unic0rn | what is that pds partition exactly? | 13:38 |
| Wizzup | again, I don't remember, wait for others | 13:38 |
| Wizzup | sorry | 13:38 |
| unic0rn | https://pastebin.com/raw/fX201vKP | 13:39 |
| Wizzup | when you installed leste, did you flash android as mentioned | 13:40 |
| Wizzup | that is VRZ_XT894_9.8.2O-72_VZW-18-8_CFC.xml.zip | 13:40 |
| Wizzup | here: https://leste.maemo.org/Motorola_Droid_4#Updating_Android | 13:42 |
| Wizzup | unic0rn: seems like this might be your problem? | 13:46 |
| unic0rn | nope, since I already had the kernel | 13:46 |
| unic0rn | so I've skipped it as the wiki suggested, cyanogen had the kernel required | 13:46 |
| Wizzup | ok, well, my suggestion would be to flash stock android and reinstall kexecboot | 13:47 |
| unic0rn | what does "reset the FEM parameters to stock settings" mean? | 13:47 |
| Wizzup | clearly cyanogenmod has a different partition contents | 13:47 |
| Wizzup | I have no more suggestions/recommendations beyond that | 13:47 |
| unic0rn | I've figured it may matter, but I don't see anything in that android update flash script that would go into pds partition | 13:47 |
| unic0rn | what is an nvs_mac? | 14:05 |
| sicelo | mac address etched in non-volatile storage (nvs) | 14:06 |
| unic0rn | so, if maserati-calibrate tries to get it from pds partition and fails, can I just replace pds mac with the current one for wlan0? | 14:07 |
| unic0rn | the one in firmware is dead beef | 14:07 |
| unic0rn | fail to tune channel, hmm | 14:23 |
| Wizzup | uvos: how can I make a contact from a recent call entry in sphone? that would be nice | 14:30 |
| unic0rn | in /usr/share/ti-utils/maserati/maserati-nvs.ini there's "Aligned to TS version 7.1.2.0.26" | 14:39 |
| unic0rn | but the latest installed firmware is 10.6.15 | 14:40 |
| freemangordon | Wizzup: you can do from addressbook | 14:55 |
| Wizzup | ah yes you're right | 14:56 |
| Wizzup | btw, this might be known | 14:56 |
| Wizzup | but 'export' on abook crashes | 14:56 |
| freemangordon | ugh, wait, I don't see dialed contacts | 14:56 |
| Wizzup | import worked fine fwiw | 14:56 |
| freemangordon | yes, export is not implmented | 14:56 |
| Wizzup | freemangordon: I do, I see the last call, but yes, sphone doesn't log group_uid compatible with fremantle and conversations yet | 14:57 |
| freemangordon | it is in todo, but... | 14:57 |
| freemangordon | ah, I see | 14:57 |
| freemangordon | you see last call where? | 14:57 |
| Wizzup | top of recent | 14:57 |
| freemangordon | not here in the VM, after the issues I had yesterday with hanging sphone | 14:57 |
| * freemangordon checks d4 | 14:58 | |
| freemangordon | no | 14:58 |
| freemangordon | Wizzup: I think calls started from abook/desktop contact are not logged | 14:58 |
| Wizzup | could be, I am not sure | 14:58 |
| Wizzup | in any case sphone does not set group uid at all | 14:58 |
| freemangordon | oh, I see the number | 14:59 |
| freemangordon | but not the contact | 14:59 |
| Wizzup | yes | 14:59 |
| freemangordon | I guess this is the 'group_id' issue | 14:59 |
| Wizzup | uvos: can we use call->backend to get properties for rtcom logging? | 14:59 |
| Wizzup | the local_uid is also not correct now | 14:59 |
| freemangordon | Wizzup: BTW, how to type : from d4 kbd? | 15:00 |
| Wizzup | where, in what? | 15:00 |
| Wizzup | it's ok + the key | 15:01 |
| Wizzup | on shift there is > | 15:01 |
| freemangordon | oh, thanks! | 15:01 |
| freemangordon | dsc_: hmm, conversations started to mark my messages with the opposite side name :) | 15:02 |
| Wizzup | dsc_: we seem to log as ring/tel/account0 as opposed to ring/tel/ring, but I think that's probably just how it's called now in tp, should not matter | 15:04 |
| freemangordon | Wizzup: yes, that's the proper account | 15:04 |
| Wizzup | what do you mean opposide side name? | 15:05 |
| freemangordon | the other party | 15:05 |
| freemangordon | lemme try to take a screenshot | 15:05 |
| Wizzup | yes but is the problem in the logging itself or whethe the message is placed right or left | 15:06 |
| Wizzup | oh ahaha | 15:06 |
| Wizzup | I see it now yes | 15:06 |
| freemangordon | mhm | 15:06 |
| Wizzup | both sides have the remote contacts name | 15:06 |
| freemangordon | yes | 15:06 |
| Wizzup | well at least it's not in the logging itself | 15:06 |
| freemangordon | and they are reversed | 15:06 |
| Wizzup | since it does this to my fremantle data too | 15:06 |
| Wizzup | I don't see this | 15:06 |
| freemangordon | reversed as - my messages appear on the right and the other party's mesage - on the left | 15:07 |
| Wizzup | heh sphone logs like this atm: | 15:10 |
| Wizzup | sphone//org/freedesktop/Telepathy/Account/ring/tel/account0/sphone | 15:10 |
| freemangordon | hmm, ctrl->shift->P, right? | 15:11 |
| Wizzup | for screenshot? | 15:11 |
| freemangordon | mhm | 15:11 |
| Wizzup | yeah or apt install scrot ; sleep 5 ; scropt | 15:11 |
| freemangordon | ok, so I see your message on th eleft | 15:11 |
| freemangordon | and mine on the right | 15:11 |
| freemangordon | both are from Merlijn :D | 15:12 |
| dsc_ | freemangordon: 0.7.2? | 15:12 |
| dsc_ | conversations | 15:12 |
| freemangordon | sec | 15:12 |
| freemangordon | 0.7.2+m7 | 15:12 |
| Wizzup | I see the same in the sms I sent dsc | 15:12 |
| Wizzup | it says dsc on both sides | 15:12 |
| Wizzup | the rtcom logging is fine though I think | 15:12 |
| Wizzup | it's just a UI thing | 15:12 |
| dsc_ | ok, ill look | 15:14 |
| Wizzup | uvos: for group_uid logging for regular phone numbers it's really quite simple | 15:15 |
| d4dsc | test | 15:15 |
| gnarface | d4dsc: test acknowledged | 15:18 |
| dsc_ | :P | 15:18 |
| freemangordon | :( https://github.com/maemo-leste/hildon-desktop/blob/master/src/util/hd-shortcuts.c#L68C31-L68C40 | 15:21 |
| freemangordon | Wizzup: what about dropping MYDOCSDIR there and using XDG_PICTURES_DIR? | 15:25 |
| Wizzup | sounds good to me, assuming that points to MyDocs/.pictures or something | 15:27 |
| freemangordon | yes. it does | 15:28 |
| Wizzup | uvos: do you get this too when building? | 15:33 |
| Wizzup | /home/user/sphone/src/modules/contacts-evolution.c: In function ‘build_query’: | 15:33 |
| Wizzup | /home/user/sphone/src/modules/contacts-evolution.c:124:53: error: ‘E_CONTACT_IM_MATRIX’ undeclared (first use in this function); did you mean ‘E_CONTACT_IM_AIM’? 124 | query = join_query(query, e_book_query_field_test(E_CONTACT_IM_MATRIX, E_BOOK_QUERY_CONTAINS, line_id)); | 15:33 |
| unic0rn | I've managed to calibrate it. removed the whole pds mac from the script, then changed the last parameter of autocalibrate from pds mac to 'default'. it was throwing some errors - about setting plt power mode, then something else, but at third try it apparently worked | 15:41 |
| Wizzup | let's hope you actually did it correctly and didn't make it worse | 15:42 |
| unic0rn | will see if the wifi stability improved | 15:42 |
| Wizzup | you can always just flash the android that we provide and then things will just work | 15:42 |
| unic0rn | it doesn't seem to be worse. in fact it seems to be better. no more random wifi disconnects all the time | 15:52 |
| freemangordon | Wizzup: somehow h-d master vs branches has diverged :( | 16:04 |
| freemangordon | I will have to force-push eitehr master or branches | 16:04 |
| Wizzup | which branches have diversed and what is the difference | 16:10 |
| freemangordon | no difference in code | 16:15 |
| freemangordon | but branches cannot be FF to master | 16:15 |
| Wizzup | I can check in ~2 hours | 16:15 |
| Wizzup | going afk for a bit | 16:15 |
| dsc_ | Wizzup, freemangordon: building a new version now, it required some UI changes (due to some more recent developments of the past week(s)) | 16:15 |
| freemangordon | anyway, I rebased master to chimaera-devel and force-pushed | 16:15 |
| freemangordon | Wizzup: ^^^ | 16:15 |
| freemangordon | dsc_: thanks, will test it ASAP | 16:16 |
| dsc_ | 0.7.4 will be available soon^tm | 16:16 |
| freemangordon | dsc_: did you fix left<->right swap | 16:16 |
| freemangordon | like, my messages should be on th eleft and others on the right | 16:17 |
| freemangordon | iiuc | 16:17 |
| freemangordon | or? | 16:17 |
| dsc_ | I was fixing some things Wizzup was talking about, but regarding left<->right I'd need to check | 16:17 |
| dsc_ | this is in a groupchat? | 16:17 |
| freemangordon | ok | 16:17 |
| freemangordon | no | 16:17 |
| freemangordon | well, let me check group chat | 16:17 |
| dsc_ | https://plak.infrapuin.nl/selif/nyhprpjy.png | 16:18 |
| dsc_ | which is correct | 16:18 |
| dsc_ | so I didnt observe it | 16:18 |
| freemangordon | ok, will test in the new version | 16:18 |
| dsc_ | but lemme know | 16:18 |
| dsc_ | alright | 16:18 |
| freemangordon | wait | 16:19 |
| freemangordon | what is on the left? the remote party? | 16:19 |
| dsc_ | left is remote, right is ours | 16:19 |
| freemangordon | ah | 16:19 |
| freemangordon | ok | 16:19 |
| dsc_ | but damn, I need to push another update. 0.7.5 coming soon^tm | 16:20 |
| dsc_ | im not really awake today btw | 16:20 |
| dsc_ | now that you are here freemangordon, regarding mem usage, idle conversations should be around 50mb | 16:25 |
| dsc_ | and every opened chatwindow is an extra 10mb | 16:26 |
| freemangordon | dsc_: UI wize - is it possible to combine multiple consecutive messages into one? | 16:26 |
| dsc_ | anything above that is something I need to investigate | 16:26 |
| freemangordon | great | 16:26 |
| freemangordon | I have to leave though in 2-3 minuts | 16:26 |
| dsc_ | freemangordon: Yeah, I made that a few days ago | 16:26 |
| freemangordon | is it pushed? | 16:26 |
| dsc_ | it groups them if the messages are 30 sec apart (or something like that) | 16:26 |
| dsc_ | yes | 16:26 |
| freemangordon | cool | 16:26 |
| dsc_ | groups = it will not show the username and time, which saves vertical space | 16:27 |
| dsc_ | its not "true grouping" where its placed into one message box | 16:27 |
| dsc_ | I was considering that though, but was a tad bit of work | 16:27 |
| dsc_ | regardless this new way is better | 16:28 |
| freemangordon | yeah | 16:30 |
| freemangordon | ok, have to run, ttyl | 16:30 |
| dsc_ | bb | 16:30 |
| arno11 | Wizzup: i think pcsx is almost ready: i modified permissions/chown, update changelog and control, remove PA atm and use sdl instead like pico | 16:55 |
| arno11 | a proper tag is needed but i prefer you have a look at this :P | 16:55 |
| arno11 | it should build now (no more CI errors), the remaining issue will be probably config file permission like pico | 16:57 |
| arno11 | and not sure sound will work, but let's see | 16:58 |
| sicelo | Wizzup: freemangordon , jfyi, LuneOS dev: "Tofe: just for a little update: with ofono 2.7, calls do work with msm8953 using the qmimodem driver" | 17:20 |
| Wizzup | sicelo: which device is this? | 17:46 |
| Wizzup | it seems to me like we indeed should try newer ofono soonish | 17:46 |
| sicelo | xiaomi rosy | 18:19 |
| Wizzup | ok | 18:20 |
| Wizzup | uvos: if I call someone and the remote party hangs up on me, is it possible that the call structure is invalid by the time call_properties_changed_trigger is called? | 18:39 |
| Wizzup | this is what I am seeing in gdb | 18:39 |
| Wizzup | hm, maybe I just need to make the code more gdb friendly | 18:41 |
| arno11 | Wizzup: what you described with call structure remember me the hangup bug on n900 | 19:42 |
| Wizzup | arno11: yeah I'll get to it | 20:36 |
| Wizzup | right now I need to figure out how to build sphone with debug symbols, since it's not clear to me at all how to do this :D | 20:36 |
| dsc_ | you can add them with a hexeditor | 20:41 |
| arno11 | Wizzup: ok ;) | 21:27 |
| Wizzup | freemangordon: any idea how to debug 'Database error while inserting event' for rtcom-el? | 21:29 |
| Wizzup | maybe I need to compile rtcom-eventlogger with debug? | 21:31 |
| Wizzup | ah got it | 21:32 |
| Wizzup | ** (sphone:25543): DEBUG: 21:32:21.698: rtcom_el_db_iterate: runtime error while executing "INSERT INTO Events (service_id, event_type_id, storage_time, start_time, end_time, is_read, outgoing, flags, bytes_sent, bytes_received, local_uid, local_name, remote_uid, channel, free_text, group_uid) VALUES ( 1, 1, 1716924741, 1716924733, 1716924741, 0, 0, 0, 0, 0, 'ring/tel/account0', '<SelfHandle>', | 21:33 |
| Wizzup | '+359...', NULL, NULL, '2568151');": UNIQUE constraint failed: GroupCache.event_id | 21:33 |
| Wizzup | sphone: store-rtcom: failed to add event to rtcom: Database error while inserting event. | 21:33 |
| Wizzup | what the | 21:33 |
| Wizzup | so there already exists a group uid for this service | 21:34 |
| Wizzup | which is for sms | 21:34 |
| Wizzup | wait no, this is on the event id | 21:35 |
| Wizzup | I don't get it, this makes no sense, why would the same event_id be used | 21:36 |
| Wizzup | so this is some trigger that messes up somehow | 21:38 |
| Wizzup | this might be the gc_update_ev_update trigger | 21:41 |
| Wizzup | huh, apparently fremantle does NOT set group_uid for call events. | 21:57 |
| Wizzup | only for sms | 21:57 |
| arno11 | calling someone from abook or from a desktop contact widget works fine btw, really cool | 23:28 |
Generated by irclog2html.py 2.17.0 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!
