| Mystified | hey Guys my wlan ath10k_pci is reporting 'BadDLLP' & ' PCIe Bus Error: severity=Correctable, type=Data Link Layer ' I've added to default line this command 'pcie_aspm=off' | 01:26 |
|---|---|---|
| Mystified | does this look right ? | 01:26 |
| Mystified | oops should read added to default grub pcie_aspm=off | 01:28 |
| Mystified | anyone around to help ?? | 02:04 |
| Mystified | can any one help with wlan ath10k_pci is reporting 'BadDLLP' & ' PCIe Bus Error: severity=Correctable, type=Data Link Layer ' I've added to default line this command 'pcie_aspm=off' | 02:26 |
| fsmithred | Mystified, stick around. You might get an answer within minutes or hours. It's not a common question. | 02:33 |
| gnarface | Mystified: not an issue i've heard of, or a kernel command-line option i've heard of, but double check you applied it right by making sure it shows up in /proc/cmdline | 02:39 |
| gnarface | i think those devices are supposed to work but they also need some firmware that might not be applied by default, so try running "dmesg |grep -i firmware" to see if it's missing any | 02:45 |
| Mystified | https://dpaste.com/B4YY52EUG | 03:07 |
| * onefang wonders if it should be pcie_spam to turn off logging spam? | 03:50 | |
| onefang | Coz you kept typing pcie_aspm. | 03:50 |
| gnarface | hmm... | 04:53 |
| Mystified | https://dpaste.com/B4YY52EUG can you guys help with ath10k_pci error 'BadDLLP' & ' PCIe Bus Error: severity=Correctable, type=Data Link Layer ' I've added to default grub line this command 'pcie_aspm=off' does this look right ? or will that just mask the issue . | 07:41 |
| rrq | Mystified: you could try "pci=noaer" instead or as well | 08:00 |
| rrq | https://discussion.fedoraproject.org/t/fedora-40-pci-bridge-from-amd-errors-pcie-bus-error-severity-correctable-type-data-link-layer-receiver-id/122955/3 | 08:01 |
| amarsh04 | in case anyone has any good references - what would I need to do on a Devuan system currently running grub-pc on a motherboard that supports both legacy BIOS and UEFI to install EFI? | 08:02 |
| rrq | you need a FAT32 partition within the first 2G, with an /EFI/BOOT directory tree mounted at /boot/efi, then install grub-efi-amd64 (for 64bit) | 08:05 |
| rrq | the partition should be marked as "efi partition", which is 0xef for a dos partition table, and some uuid for a gpt partition table | 08:07 |
| rrq | C12A7328-F81F-11D2-BA4B-00A0C93EC93B for GPT | 08:08 |
| rrq | (man sfdisk) | 08:08 |
| amarsh04 | sounds like a job for gparted to get the partition made | 08:09 |
| amarsh04 | and thanks! | 08:10 |
| Mystified | rrq: Thanks | 08:12 |
| Mystified | what is your recomendation, both or just pci=noaer ? | 08:12 |
| rrq | I'd try only noaer | 08:13 |
| Mystified | again thanks rrq: ) | 08:14 |
| Mystified | unable to reboot or test until this compile finishes 53349/57298 | 08:17 |
| Mystified | over 24 hours of compiling | 08:17 |
| Mystified | what is the correct way to install this .deb pkg from the command line, I've downloaded the deb pkg in to my home folder ? https://dpaste.com/7UPEUS2CV | 08:41 |
| rrq | the -dbgsym package contains the symbols (only) ... maybe you want "ungoogled-chromium" rather? or actually "chromium" in devuan? | 08:44 |
| rrq | (the symbols are the symbols of the stripped binary, to be used when debugging the binary) | 08:46 |
| Mystified | yes, but there is no ungoogled ? | 08:46 |
| rrq | afaiui "chromium" in devuan is the ungoogled but not named as such | 08:47 |
| rrq | not being an expert on that though | 08:48 |
| Mystified | thanks, | 08:49 |
| Mystified | i'm googling the dfeerence at this moment | 08:49 |
| Mystified | rrq: not successful ! https://dpaste.com/6E46DA79B | 09:01 |
| Mystified | on wlan | 09:01 |
| onefang | Probably not something you want to google, any other search engine might be a better choice for this question. | 09:02 |
| rrq | Mystified: the device doesn't work? | 09:04 |
| Mystified | i'm using it !! | 09:06 |
| rrq | I see it failed on loading some firmware files and then succeeded on some others | 09:06 |
| Mystified | looks like it ! | 09:06 |
| rrq | do you have those files, or does it report like that for missing files? | 09:07 |
| Mystified | this 2-in1 only has wlan, no ethernet | 09:07 |
| Mystified | just atates that it's missing. I'm not much of a techie ! | 09:07 |
| Mystified | firmware-atheros/stable-backports,now 20240709-2~bpo12+1 all [installed] | 09:09 |
| rrq | looks good then (?) those files are not available | 09:12 |
| Mystified | https://debian.pkgs.org/12/debian-nonfree-firmware-amd64/firmware-atheros_20230210-5_all.deb.html | 09:15 |
| Mystified | ignore | 09:15 |
| Mystified | 2023 | 09:15 |
| Mystified | ahh not debian https://pkgs.org/download/atheros-firmware | 09:16 |
| Mystified | how can I install this ? firmware-atheros_20241210-1_all.deb https://packages.debian.org/sid/all/firmware-atheros/download | 09:21 |
| rrq | that's the "ceres" version (in devuan) .. you're sure you need it? (it doesn't have thos "missing" files either) | 09:26 |
| rrq | see https://pkginfo.devuan.org/cgi-bin/package-query.html?c=package&q=firmware-atheros=20241210-1 | 09:26 |
| Mystified | thank you, so what do I do with them ? | 09:28 |
| rrq | as the device works, I would ignore those log lines. | 09:29 |
| Mystified | ok thanks | 09:30 |
| emanuel | Does anyone here have experience with migrating from Debian sid to Devuan ceres? I followed the guide for bookworm to deadalus but now (after the reboot) USB and Ethernet are not working. Perhaps it is because systemd-modules-load was loading some kernel modules before, but I cannot find any systemd-modules-load configuration. Everything I found was empty. And since only the serial console works I cannot easily reinstall packages | 19:57 |
| emanuel | via apt. I have to transfer every file I need as base64 using the serial console. I need to migrate from Debian sid because it is a riscv64 system. I cannot simply use a normal installation medium. | 19:57 |
| emanuel | i can only use ceres/sid or excalibur/trixie because riscv64 is only officialy supported by Debian since then. | 20:35 |
| freem | emanuel: as root, try: | 23:49 |
| freem | udevadm --debug trigger --type=subsystems --action=add | 23:49 |
| freem | udevadm --debug trigger --type=devices --action=add | 23:49 |
| freem | udevadm --debug settle | 23:49 |
| freem | I do not know if that will help, and it will only work for an uptime, this is the stuff I had to put in my runit files for udev | 23:49 |
Generated by irclog2html.py 2.17.0 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!