# manpage character cleanup for UTF-8 compatibility ("-" chars must be escaped
# ("\-") to be interpreted as minus by groff).
# http://lists.debian.org/debian-devel/2003/debian-devel-200303/msg01481.html
--- xplanet-1.2.1~svn147.orig/xplanet.1
+++ xplanet-1.2.1~svn147/xplanet.1
@@ -31,7 +31,7 @@
 .sp
 .fi
 where declination is in degrees and right ascension is in hours.  This
-option has no effect if -projection is specified.
+option has no effect if \-projection is specified.
 
 .TP
 .B \-arc_spacing spacing
@@ -48,8 +48,8 @@
 .TP
 .B \-background background_file
 Use background_file as the background image, with the planet to be
-superimposed upon it.  A color may also be supplied (e.g. -background
-"navy blue" or -background 0xff00ff).
+superimposed upon it.  A color may also be supplied (e.g. \-background
+"navy blue" or \-background 0xff00ff).
 
 .TP
 .B \-base_magnitude magnitude
@@ -67,20 +67,20 @@
 pluto, charon, random, and major.  
 
 The field of view can also be centered on a satellite location using
-"naif" or "norad", along with the satellite id.  For example, "-body
-naif-82" will center the field of view on NAIF ID -82, which is the
+"naif" or "norad", along with the satellite id.  For example, "\-body
+naif-82" will center the field of view on NAIF ID \-82, which is the
 Cassini orbiter.  Xplanet must be compiled with SPICE support and the
 required kernels must be present.  See the README in the spice
-subdirectory for more details.  Using "-body norad20580" will center
+subdirectory for more details.  Using "\-body norad20580" will center
 the field of view on NORAD ID 20580, which is the Hubble Space
 Telescope.  The appropriate TLE files must be present in this case.
 See the README in the satellites subdirectory for more information.
 
 Using "path" will center the field of view on the direction of motion
 of the origin.  This direction is relative to the direction of motion
-of the body specified by -path_relative_to.
+of the body specified by \-path_relative_to.
 
-Earth is the default body.  This option is the same as -target.
+Earth is the default body.  This option is the same as \-target.
 
 .TP
 .B \-center +x+y
@@ -92,13 +92,13 @@
 .B \-color color
 Set the color for the label.  The default is "red".  Any color in the
 rgb.txt file may be used.  Colors may also be specified by RGB hex
-values; for example -color 0xff and -color blue mean the same thing,
-as do -color 0xff0000 and -color red.
+values; for example \-color 0xff and \-color blue mean the same thing,
+as do \-color 0xff0000 and \-color red.
 
 .TP
 .B \-config config_file
 Use the configuration file config_file.  The format of config_file is
-described in README.config.  See the description of -searchdir to see
+described in README.config.  See the description of \-searchdir to see
 where xplanet looks in order to find the configuration file.
 
 .TP
@@ -116,7 +116,7 @@
 .TP
 .B \-dynamic_origin file
 Specify an observer location.  The location is relative to the body
-specified with -origin (by default, this is the Sun).  The last line
+specified with \-origin (by default, this is the Sun).  The last line
 of the file must be of the form
 .nf
 .sp
@@ -126,7 +126,7 @@
 For example,
 .nf
 .sp
-19951207.120000     10.328   -3.018   97.709    9.595
+19951207.120000     10.328   \-3.018   97.709    9.595
 .sp
 .fi
 The specified time is ignored and the current time is used.  The range
@@ -134,7 +134,7 @@
 hours) is optional, but if present, it will be used in place of the
 longitude.  Only the last line of the file is used.  This file may be
 updated between renderings using a script executed with the
--prev_command or -post_command options.
+\-prev_command or \-post_command options.
 
 .TP
 .B \-ephemeris_file filename
@@ -144,13 +144,13 @@
 little endian binary files.  The ephemeris files found at
 ftp://ssd.jpl.nasa.gov/pub/eph/export/unix are big endian files, but
 you do not need to do any additional byte-swapping to use them.  See
-the description of -searchdir to see where xplanet looks in order to
+the description of \-searchdir to see where xplanet looks in order to
 find the ephemeris file.
 
 .TP
 .B \-font fontname 
 Set the font for the label.  Only TrueType fonts are supported.  If
-the -pango option is used, fontname is taken to be the font family
+the \-pango option is used, fontname is taken to be the font family
 name (e.g. "Arial").
 
 .TP
@@ -168,9 +168,9 @@
 
 .TP
 .B \-fov
-Specify the field of view, in degrees.  This option and the -radius
+Specify the field of view, in degrees.  This option and the \-radius
 option are mutually exclusive.  This option has no effect if the
--projection option is used.
+\-projection option is used.
 
 .TP
 .B \-geometry string
@@ -179,7 +179,7 @@
 (e.g. 256x256-10+10 puts a window 256x256 pixels in size 10 pixels
 away from the right side and 10 pixels below the top of the root
 window).  The root window outside of the image will be black.  This
-option may be used with -window or -output.
+option may be used with \-window or \-output.
 
 .TP
 .B \-glare radius
@@ -188,7 +188,7 @@
 
 .TP
 .B \-gmtlabel
-Same as the -label option, but show GMT instead of local time.
+Same as the \-label option, but show GMT instead of local time.
 
 .TP
 .B \-grs_longitude lon
@@ -213,7 +213,7 @@
 
 .TP
 .B \-interpolate_origin_file
-This option is only useful in conjunction with -origin_file.  It
+This option is only useful in conjunction with \-origin_file.  It
 computes the observer position at the current time by interpolating
 between values specified in the origin file.  This is useful if you
 have spacecraft positions tabulated in an origin file, but want a real
@@ -230,14 +230,14 @@
 .TP
 .B \-labelpos
 Specify the location of the label using the standard X window geometry
-syntax.  The default position is "-15+15", or 15 pixels to the left
+syntax.  The default position is "\-15+15", or 15 pixels to the left
 and below the top right corner of the display.  This option implies
--label. 
+\-label.
 
 .TP
 .B \-label_body body
 Use the specified body to calculate the sub-observer, sub-solar, and
-illumination values in the label.  This is useful with the -separation
+illumination values in the label.  This is useful with the \-separation
 option.
 
 .TP
@@ -268,17 +268,17 @@
 .B \-longitude longitude 
 Place the observer above the specified longitude (in degrees).
 Longitude is positive going east, negative going west (for the earth
-and moon), so for example Los Angeles is at -118 or 242.  The default
+and moon), so for example Los Angeles is at \-118 or 242.  The default
 value is 0.
 
 .TP
 .B \-make_cloud_maps
 If there is an entry in the config file for cloud_map, xplanet will
 output a day and night image with clouds overlaid and then exit.  The
-images will be created in the directory specified by -tmpdir, or in
-the current directory if -tmpdir is not used.  The names of the output
+images will be created in the directory specified by \-tmpdir, or in
+the current directory if \-tmpdir is not used.  The names of the output
 images default to day_clouds.jpg and night_clouds.jpg, but may be
-changed by the -output option.  If "-output filename.extension" is
+changed by the \-output option.  If "\-output filename.extension" is
 specified, the output images will be named "day_filename.extension"
 and "night_filename.extension".  The dimensions of the output images
 are the same as the day image.
@@ -290,11 +290,11 @@
 declination, right ascension, string, as in the example below:
 .nf
 .sp
--16.7161 6.7525 "Sirius"
+\-16.7161 6.7525 "Sirius"
 .sp
 .fi
 For additional options which may be specified, see the marker_file
-entry in README.config.  This option has no effect if -projection is
+entry in README.config.  This option has no effect if \-projection is
 specified.  This option is not meant for city markers; for that use
 the marker_file option in the configuration file.
 
@@ -321,9 +321,9 @@
 body:        body's north pole
 galactic:    galactic north pole
 orbit:       body's orbital north pole (perpendicular to the orbit plane)
-path:        origin's velocity vector  (also see -path_relative_to option)
+path:        origin's velocity vector  (also see \-path_relative_to option)
 separation:  perpendicular to the line of sight and the
-	     target-separation target line (see -separation option)
+	     target-separation target line (see \-separation option)
 .sp
 .fi
 The default value is "body".
@@ -335,7 +335,7 @@
 .TP
 .B \-origin body
 Place the observer at the center of the specified body.  Valid values
-are the same as for -target.  In addition, "above", "below", or
+are the same as for \-target.  In addition, "above", "below", or
 "system" may be specified.  Using "above" or "below" centers the view
 on the body's primary and the field of view is large enough to show
 the body's orbit.  Using "system" places the observer at the center of
@@ -351,15 +351,15 @@
 If the body name is preceded by a dash, the observer is placed on the
 opposite side of the target from the specified body at a distance
 equal to the distance between the target and body.  For example,
--target earth -origin sun places the observer at the center of the
-sun.  If -target earth -origin -sun is used, the observer is placed on
+\-target earth \-origin sun places the observer at the center of the
+sun.  If \-target earth \-origin \-sun is used, the observer is placed on
 a line connecting the centers of the earth and sun at a distance of 1
 AU farther from the sun than the earth.
 
 .TP
 .B \-origin_file origin_file
 Specify a list of observer positions in origin_file.  The positions
-are relative to the body specified with -origin (by default, this is
+are relative to the body specified with \-origin (by default, this is
 the Sun).  Each line should be of the form
 .nf
 .sp
@@ -369,14 +369,14 @@
 For example,
 .nf
 .sp
-19951207.120000     10.328   -3.018   97.709    9.595
+19951207.120000     10.328   \-3.018   97.709    9.595
 .sp
 .fi
 Range is in planetary radii, and lat and lon are in degrees.  The date
 is the only required value.  If the localtime (in hours) is supplied,
 it will be used in place of the longitude.  For each line in the
 origin file, the observer is placed at the specified position,
-relative to the body specified with -origin.  This option is useful
+relative to the body specified with \-origin.  This option is useful
 for showing spacecraft flybys or orbiting around a planet.  Any line
 with a # in the first column is ignored.
 
@@ -386,8 +386,8 @@
 taken from the extension. Currently .gif, .jpg, .ppm, .png, and .tiff
 images can be created, if xplanet has been compiled with the
 appropriate libraries.  The image size defaults to 512 by 512 pixels
-but this may be changed by the -geometry flag. If used with the
--num_times option, each output file will be numbered sequentially.
+but this may be changed by the \-geometry flag. If used with the
+\-num_times option, each output file will be numbered sequentially.
 
 .TP
 .B \-output_start_index index
@@ -404,7 +404,7 @@
 
 .TP
 .B \-path_relative_to body
-Only used with -north path or -target path.  The origin's velocity
+Only used with \-north path or \-target path.  The origin's velocity
 vector is calculated relative to the specified body.  By default, this
 is the Sun.
 
@@ -416,7 +416,7 @@
 On MS Windows, you may need to use unix-style paths.  For example:
 .nf
 .sp
-xplanet.exe -prev_command ./prev.bat
+xplanet.exe \-prev_command ./prev.bat
 .sp
 .fi
 
@@ -466,13 +466,13 @@
 center, in units of the planetary radius.  The default value is 1000.
 Note that if you use very close ranges the field of view of the screen
 can be greater than 180 degrees!  If you want an "up close" image use
-the -radius option.
+the \-radius option.
 
 .TP
 .B \-rotate angle 
 Rotate the globe by angle degrees counterclockwise so that north (as
-defined by the -north argument) isn't at the top.  The default value
-is 0.  My friends in the Southern Hemisphere can use -rotate 180 to
+defined by the \-north argument) isn't at the top.  The default value
+is 0.  My friends in the Southern Hemisphere can use \-rotate 180 to
 make the earth look like it should!  For non-orthographic projections,
 the globe is rotated and then projected, if that helps you visualize
 what to expect.
@@ -481,7 +481,7 @@
 .B \-save_desktop_file
 On Microsoft Windows and Mac OS X, xplanet creates an intermediate
 image file which is used to set the desktop.  This file will be
-created in the -tmpdir directory.  By default, this image is removed
+created in the \-tmpdir directory.  By default, this image is removed
 after the desktop has been set.  Specifying this option will leave the
 file in place.
 
@@ -507,14 +507,14 @@
 .TP
 .B \-separation body:dist
 Place the observer at a location where the target body and the
-separation body are dist degrees apart.  For example "-target earth
--separation moon:-3" means place the observer at a location where the
+separation body are dist degrees apart.  For example "\-target earth
+\-separation moon:-3" means place the observer at a location where the
 moon appears 3 degrees to the left of the earth.
 
 .TP
 .B \-spice_ephemeris index
 Use SPICE kernels to compute the position of the named body.  The
-index is the naif ID code (e.g. 599 for Jupiter).  The -spice_file
+index is the naif ID code (e.g. 599 for Jupiter).  The \-spice_file
 option must be used to supply the names of the kernel files.  This
 option may be used more than once for different bodies.
 
@@ -544,15 +544,15 @@
 decimal hours.  For example, the entry for Sirius is
 .nf
 .sp
--16.7161  6.7525 -1.46
+\-16.7161  6.7525 \-1.46
 .sp
 .fi
-See the description of -searchdir to see where xplanet looks in order
+See the description of \-searchdir to see where xplanet looks in order
 to find the star map.
 
 .TP
 .B \-target target
-Same as -body.
+Same as \-body.
 
 .TP
 .B \-tt
@@ -568,13 +568,13 @@
 .TP
 .B \-tmpdir tmpdir
 Specify a directory that xplanet will use to place images created
-using -make_cloud_maps.  On Microsoft Windows, xplanet will write
+using \-make_cloud_maps.  On Microsoft Windows, xplanet will write
 a bitmap file called xplanet.bmp to the specified directory.  The
 default is the result of the GetWindowsDirectory call (C:\WINDOWS on
 Win95).  On Mac OS X, xplanet will create an intermediate PNG file in
 order to set the background.  The default value is /tmp.  On Windows
 and Mac OS X, the intermediate file will be removed unless the
--save_desktop_file option is specified.
+\-save_desktop_file option is specified.
 
 .TP
 .B \-transparency
@@ -583,12 +583,12 @@
 
 .TP
 .B \-transpng filename
-Same as the -output option, except set the background to be
+Same as the \-output option, except set the background to be
 transparent when writing a PNG file.  
 
 .TP
 .B \-utclabel
-Same as -gmtlabel.
+Same as \-gmtlabel.
 
 .TP
 .B \-verbosity level
@@ -624,13 +624,13 @@
 .TP
 .B \-window
 Render the image to its own X window.  The size defaults to 512 by 512
-pixels but this may be set by the -geometry flag.
+pixels but this may be set by the \-geometry flag.
 
 .TP
 .B \-window_title title
-Set the window's title to title.  This option implies -window.
+Set the window's title to title.  This option implies \-window.
 
 .TP
 .B \-xscreensaver
-Same as -vroot.
+Same as \-vroot.
 
